Here's how to mount the newly redesigned Double Adapter for the Tele14 Ashtray 3 Saddle tailpiece. Installation is as simple as tightening the two mounting screws. Just slip the adapter over the tailpiece lip and line the rollers up with the bridge saddles and tighten the screws. After you tighten the second one, go back and tighten the first one a little tighter and then give the second one a last snugging up. It’s mounted!

 Now put the two strings on – First, thread each string under the rear roller, then over the middle roller and then under the front roller. Then hook the ball end of the string on the pin at the back of the bender and the other end to your tuning keys. Making sure the strings are all in the roller grooves, tighten the strings to pitch.

(Click any picture for large version and captions)

SPECIAL INSTRUCTIONS FOR THE DOUBLE TELE14 ASHTRAY 3 SADDLE BENDER

Non-Defacing, Affordable String Benders For Electric and Acoustic Guitars

Once you have mounted the bender and put the strings on, go to paragraph 10 on the Tele14 Models Mounting Instructions to finish learning about the bender operations and maintenance.